Application Notes
Mounting
Section titled “Mounting”- Fix the board with the four M2 holes at its corners.
- Use standoffs (M2 × 5 mm, nylon or aluminium) to leave clearance for the bottom-side components.
Power and isolation
Section titled “Power and isolation”- The board accepts a 2S–6S battery directly (7.4 V – 25.2 V) and conditions it for the radio module.
- The Ethernet interface is galvanically isolated, which protects the system and the radio from ground loops and transient damage.
Radio configuration
Section titled “Radio configuration”Press the CONFIG button (SW1) to enter radio configuration mode. The three RSSI LEDs show received signal strength from level 1 (lowest) to level 3 (strongest).

