Application Notes
System integration
Section titled “System integration”RC mode, ground to air link
NX-Controller → ground radio → air radio → NX-SBus → flight controller (RCIN / SBUS in). The controller connects to the radio over UART or Ethernet.
Gamepad mode, USB HID link
NX-Controller → GCS computer (Mission Planner or QGroundControl) → flight controller via MAVLink override.
Notes for RC mode
Section titled “Notes for RC mode”- SBUS is sent on
UART_TX: 100 kbaud, 8E2, inverted. All 16 SBUS channels are always transmitted. - The four flight-mode select buttons map to SBUS channel 5, and the two ARM / DISARM buttons to channel 6.
- An SBUS-capable board on the aircraft is required to decode SBUS and forward it to the flight controller’s RCIN port. The NX-SBus (
NX02-02) is the companion board.
Notes for gamepad mode
Section titled “Notes for gamepad mode”- The controller enumerates as a standard USB HID gamepad. No driver installation is needed on Windows, macOS or Linux.
- It is powered from the USB host at 5 V, with no external supply needed.
- It works with Mission Planner, QGroundControl and any ground station that supports MAVLink RC override.
Typical applications
Section titled “Typical applications”- Fixed-wing, multirotor and VTOL UAV ground control stations
- Custom GCS consoles with an integrated display (USB HID joystick mode)
- Long-range UAV operations over UART / Ethernet radio links (RC mode)
- Rover and ground robot teleoperation
- Industrial inspection drone remote control
- Development and prototyping of UAV control systems using MAVLink

